TTL Logo Color HorizARC Melting Furnace

Thermal Technology's Arc Melting Furnace is effective for powder melting, arc casting, metallic and non-metallic buttons, annealling, compound synthesis and material densification. The ARC melting furnace features ease of operation, dependability, versatility and affordability while offering instant high temperature and extremely pure melts. This ARC melting furnace accepts a variety of hearth configurations and can accommodate a titanium getter.

FOR THE PREPARATION OF HIGH PURITY MELTS

Because of its simplicity, ease of internal access and small volume, Thermal Technology's ARC melting furnace is easily purged. Work specimens are, therefore, quickly prepared and a high degree of purity is maintained. The ARC melting furnace consists of a water-cooled stainless steel bell jar hinged to a fixed baseplate. The electrode (stinger) shaft penetrates the top of the bell jar. The stinger is sealed at the top of the bell jar by means of a ball joint and stainless steel bellows. The hearth is water-cooled copper with interchangeable top surface. Various cavity configurations can be provided in the hearth top surface. Light and window ports facilitate inside observation. Clamps are provided for operation at a slightly positive pressure. Pressure compensation for "zero feel" is incorporated into the seal design. Provision is made for attachment to a vacuum pump for evacuation prior to back-filling with inert gas. Also included are ports and gauges for inert gas.


  alt
ARC Melting Furnace
Click for larger picture

Specifications:

Max Temp: over 3000°C
Light: Located at bell jar top
Hearth: 9” (22.9 cm) O.D. water-cooled copper
Bell Jar: 10”(24.4cm) dia. x 11½” high (29.2cm) Stainless Steel water-jacketed
Stinger Tip: ¼” (6.4 mm) dia. Thoriated Tungsten Rod
Arc Starter: ¼” (6.4 mm) dia. Thoriated Tungsten Rod
Base Plate: 18.5” (47 cm) dia. Aluminum
Weight: (less power supply) 45 lbs (20.4 kgs)
Window: View port at bell jar top
Typical Sample Size: 1/2" - 3" dia. (13mm - 76mm)

Requirements:

Electrical: Up to 1000 amps D.C. welding-type power supply
Water: 4 GPM @ 50 PSI and 70°F (30.4 LPM @ 3.5 kgs/cm²)
Evacuation Pump: 2 CFM (56.6 LPM) vacuum pump
Inert Gas: 2-10 CFM (56.6 - 283.2 LPM)

Typical System:

A typical system consists of Basic Furnace, Evacuation Kit, Inert Gas Kit, Power Cables, Power Supply and Base Cabinet
 
alt
click for downloadable sales sheet
All specifications are subject to change. Final quotation will be the governing document in all cases.
Terms of UsePrivacy Statement